Idiomas disponibles
Idiomas disponibles
If you drop the camera in water or if water or a piece of
metal or other foreign object gets inside, remove the
battery immediately. Heat generation or fire may occur.
Do not use this camera in places where there is
flammable gas or near gasoline, benzine, paint thinner or
other unstable substances which can give off dangerous
vapors. Use in such environments could result in
explosion or fire.
Keep the product out of the reach of infants and small
children. Injury may occur.
Do not disassemble, heat the battery, throw it in a fire,
or put it in an electrical short circuit. The battery may
rupture.
Do not use the battery except as specified and do not
use any battery other than the one supplied with the
camera. Heat generation or fire may occur if another
battery is used.
Keep battery out of the reach of infants. An infant may
accidentally swallow a battery. In the event that a battery
is swallowed, seek medical attention immediately.
CAUTION
If the camera is not functioning correctly, contact a
Fujifilm customer service or repair center. To avoid injury,
do not attempt to repair this product yourself.
Do not touch any parts within the inside of the back
cover. This may cause injury or malfunction.
Do not handle this product with wet hands. Electric
shock may occur.
Do not cover or wrap the camera in a cloth or blanket.
This can cause heat to build up and distort the casing or
cause a fire.
Using a flash too close to a person's eyes may, for the
short term, affect their eyesight. Take care when taking
photos of infants and young children.
Make sure that the battery
correct. Damage to surrounding area may occur if the
camera is damaged or if battery fluid leaks out.
Do not touch moving parts inside the camera. You may
be injured.
and
polarities are
The "CE" mark certifies that this product
satisfies the requirements of the European
Union (EU) regarding safety, public health,
environment, and consumer protection.
("CE" is the abbreviation of Conformité
Européenne.)
■ Legally required regulation compliance displays are
located on the inside of the back cover of the camera.
EN
17
