Idiomas disponibles
Idiomas disponibles
Self-Timer
The self-timer allows you to snap a picture and have a 10-second delay before
the actual picture is taken.
1.
Select the self-timer feature from the options menu.
2.
Set up your shot, using the Zoom DualCam 1300 tripod if necessary.
3.
Press and release the Shutter/Confirm button. The camera beeps until the
picture is taken (about 10 seconds).
4.
To deactivate the self-timer function, press the Shutter/Confirm button
within 10 seconds to stop the self-timer countdown.
5.
Re-select the mode to cancel the self-timer function.
Continuous Snapshot
1.
Select the continuous snap feature from the options menu.
2.
Press Shutter/Confirm button to take 3 continuous pictures (1fps).
3.
Re-select this mode to activate this function again.
Taking A Video
1.
Select Video mode to activate the function.
2.
Center the subject in the viewfinder.
3.
Press the Shutter/Confirm button to capture images continuously at about
9 frames per second and store them in the memory until the button is
released.
4.
Continue shooting and hold the camera steady.
5.
The picture is stored in AVI format and the picture number increases by only
one.
6.
Re-select this mode to cancel this function.
Erasing/Deleting Pictures
With the Zoom DualCam 1300, you have the ability to erase all photos or just the
last picture or video taken. When the camera memory is full, the LCD displays
FUL, and you cannot take any more pictures until you have downloaded your
pictures or erased them by using the EAL – Erase All, or E01 – Erase Last
Picture option.
Using the Camera as a PC Web Camera
If the camera is connected to a Windows PC's USB port, the camera is in PC
mode. The digital still-camera mode is disabled, and the LCD display shows the
text PC. If the camera is unplugged from the USB port, the camera returns to
digital still-camera mode and automatically powers off. Use the included
VideoImpression application for video recording to create video email or video
presentations.
Microsoft Netmeeting® and other video conferencing software are compatible
with the Zoom DualCam 1300. Your Windows PC may already have Netmeeting
installed; if it doesn't, you should be able to get Netmeeting from the Microsoft
Web site at www.microsoft.com/downloads. If you run Netmeeting, please
select the Zoom DualCam 1300 as the video source and follow the instructions
within NetMeeting.
Using the 1.3 MegaPixel Interpolation Software for Snapshots
1.
Make sure you have the camera set to Hi resolution.
2.
Connect your camera to the computer with the camera's USB cable.
3.
Select Arcsoft PhotoImpression from the program menu.
4.
Once PhotoImpression is loaded, select Camera/Scanner.
5.
Pick Zoom DualCam 1300 from the Select Source pull-down menu and
click the Camera and Scanner icon.
6.
A window opens.
7.
Select the Setting icon in the lower left corner.
5
