Idiomas disponibles
Idiomas disponibles
REF. 60003
EN
INSTRUCTION MANUAL
PRODUCT'S PRESENTATION
This inflator allows you to inflate car and bike tires,
balls, rafts, air mattresses, swimming pool floats, etc.
Its is equipped with a LED light, a 12V cigarette lighter
plug adaptor, a digital LCD display screen and a wor-
king mode switch to select between two air flow modes
as required. The air pressure is adjustable and can be
visible in the display screen in 3 different units: PSI,
BAR and KPa. Besides, it includes a high-pressure
hose with a universal valve, a high-capacity hose, a
valve adaptor, a cone shape adaptor, and a blowing or
inflation needle.
SAFETY INSTRUCTIONS
WARNING! Read all safety warnings and all ins-
tructions. Failure to follow the warnings and instruc-
tions listed below may result in electric shock, fire and/
or serious injury.
• Check for breakage of parts, damage to switches
and any other conditions that may affect its opera-
tion.
• The compressed air from your inflator is not safe
for breathing. Never inhale air from your inflator.
• Recommended maximum continuous duty at 65
PSI is 2 minutes on with 5 minutes off.
• Use a tire gauge to check the tyres pressure befo-
re each use and while inflating tyres; see the tyre
sidewall for the correct tyre pressure.
• Too much air pressure causes a hazardous risk
of bursting.
• Check the manufacturer's maximum pressure ra-
ting for objects being inflated.
• Do not leave inflator running unattended. It could
burst tires or other items.
• Do not modify or attempt to repair.
Working mode
I
II
Mode I
You can use the universal valve or
the adaptors provided:
Note: When using the inflator, after using it for 10 minutes, stop it for 10 minutes to cool it down.
For objects that need more air pressure, such as tires and basketballs.
For objects that hold large amounts of air, such as air mattresses and rafts.
If you want to use an adaptor, put
it on the universal valve and lock it
turning down the lever:
• Inflator can become hot during use. Allow inflator
to cool 30 minutes before storing away.
OPERATION
Choose the power supply:
• 20V Battery
• 12V Cigarette plug
To turn on the inflator, press the power button and se-
lect the measurement unit (PSI/bar/kPa).
To turn it off, press the power button for about 5 se-
conds.
Select the desired pressure by pressing the + and –
buttons.
To run the inflator, turn the switch to the desired wor-
king mode (I or II):
Aplications
· 5 ·
WARNING: When not using the
high-pressure hose, always make
sure that the lever is in the up po-
sition:
