Idiomas disponibles
Idiomas disponibles
Inserting batteries
Detach the battery cover on the rear of the remote control
and
insert two R6 (size AA) batteries.
@~e
R6(AA)
When to replace the batteries
The maximum
operational
distance
between
the remote control
and the sensor on the main unit should be approximately
5 meters
(16 feet).
When this distance
decreases,
replace the batteries
with new ones.
To use SHIFT on the remote control
Buttons
@ have two different
functions.
One of these functions
is indicated
on the button, and the other on the plate above the
button.
To use the function
on the button, simply press the button.
To use the function on the plate above the button, press the button
while pressing
SHIFT.
To use FUNCTION on the remote control
The
FUNCTION
substitutes
for the function buttons (TAPIYDECK
1/2, TUNER,
VIDEO/AUX,
CD) on the main unit.
Each time FUNCTION
is pressed,
the next function
is selected
cyclically.
When tapes are inserted
in both decks, each deck is
selected
with
FUNCTION.
If the remote control
is not going to be used for an extended
period
of time,
remove
the batteries
to prevent
possible
electrolyte
leakage.
The remote control may not operate correctly
when:
- The line of sight between
the remote control and the remote
sensor inside the display window
is exposed
to intense
light,
such as direct sunlight
- Other remote controls are used nearby (those of a television,
etc.)
POWER
,—
~"-
—.
CD
In
. .
h
~
-/
CLOCIU
-—
!:–—
---
DIMMER
To turn the unit on
Press one of the function
buttons (TAPE, TUNER,
VIDEO/AUX,
CD). Playback of the inserted disc or tape begins, or the previously
tuned station is received
(Direct Play Function).
pOWER
is also available.
When the unit is turned on, the disc compartment
may open and
close to reset the unit.
To turn the power off
Press
POWER.
Flash window
The window
on the top of the unit lights up or flashes
while the
unit is being powered
on.
To turn off the light of the top window,
press W while pressing
CD.
To turn back on, repeat the above.
DEMO (Demonstration)
mode
When the AC cord is connected,
the display window demonstrates
the functions
of the unit. When the power is turned on, the DEMO
display is overridden
by the operation
display.
When the power
is turned off, the DEMO mode is restored;
To cancel DEMO mode
Press II SET while the power is off. The clock flashes on the
display. (To set the current time, see "SETTING
THE CLOCK
on page 15.) To re-activate
DEMO mode, press ~
while the
power is off.
Demo game
You can enjoy playing Demo game with your system.
1 Press >.
Three numbers
on the display start to run.
2
Press
once.
The number on the left side stops.
3
Press
twice to stop the remaining
two numbers.
Scoring:
20 points are given to start the game.
If all the numbers
are equal, 50 points are added to the score.
If not eaual, one point is subtracted.
If the gained points reach 9999, you win.
If the gained points fall to O, you lose.
To reset the game
Press
CLOCW-DIMMER,
then press >. The game starts again.
5
ENGLISH
