Idiomas disponibles
Idiomas disponibles
Always Active Mode
For busy days on the job, try using the Active Mode to keep you moving faster.
Avoid the hassle of turning the scanner on again and reconnecting to your host
device.
Scan one of the barcodes below and reconfigure the scanner to remain on
longer.
Note: Turn off the host device's Bluetooth prior to scanning one of the alternate
timer barcodes. Then turn the Bluetooth back on.
Power cycle the scanner (turn off/on).
Scanner Always On*
Configures the scanner to never
power off.
Continuous Power for 8 hours*
Scan Barcode to configure the
scanner to remain on for 8 hours.
Continuous Power for 4 hours*
Scan Barcode to configure the
scanner to remain on for 4 hours.
*These settings drain the battery faster. It is assumed you will charge
the scanner within a 24-hour period or overnight. If you don't, the
scanner's battery will drain completely.
Return Scanner to Default
Setting
Turns the scanner off when it is
not in use – 3 to 5 minutes after
being disconnected from host
device.
Quick Programming
Bluetooth Connection Modes
24
#FNB012100000000#
#FNB012101E001E0#
#FNB012100F000F0#
#FNB012100780005#
