Idiomas disponibles
Idiomas disponibles
Vibrate
Vibrate
Command Barcodes are available on pages
beep, and vibrate settings.
If you are using a scanner-enabled application, typically the application
provides settings for LED, beep, and vibrate settings.
Configuration Settings
Time after powering on
Scanner
0-5 minutes
5 minutes
2 hours
Status Indicators
Meaning
Data successfully scanned
Bluetooth mode
Discoverable and connectable
If connection is not made, scanner powers off
If your scanner is connected but not used it will
power off in 2 hours. When trigger button is
pressed the timer is reset.
21
43-46
to modify the LED,
