Idiomas disponibles
Idiomas disponibles
CONNECTING HOUSE POWER
ELECTRICAL INSTALLATION WITH CONNECTION CABLE
6
GROUNDING INSTRUCTIONS This appliance must be grounded. In the event of an
electrical short circuit, grounding reduces the risk of electric shock by providing an
escape wire for the electric current. This appliance is equipped with a cord having a
grounding wire with a grounding plug. The plug must be plugged into an outlet that is
properly installed and grounded.
WARNING - Improper grounding can result in a risk of electric shock.
Consult a qualified electrician if the grounding instructions are not completely understood,
or if doubt exists as to whether the appliance is properly grounded.
Do not use an extension cord. If the power supply cord is too short, have a qualified
electrician install an outlet near the appliance.
Max. 33
"
7/16
The power cord shall be accessible for inspection after installation.
CUSTOM FRONT TRIM OPTION
This hood comes with a stainless front trim installed. To replace and customize this
panel, remove grease filters and the three Phillips screws located behind the strip. If
necessary, the front strip can be adjusted by loosening the three Phillips screws and
sliding the strip up or down.
Tighten screws when you have the strip properly placed.
For a custom front trim, a local cabinet shop can make a strip to match your cabinets.
The front strip dimensions are given in the illustration.
1 1/2"
23 9/16" or 29 15/16"
18
