Tabla de contenido
Idiomas disponibles
Idiomas disponibles
4
66
3
71
67
35
#66 M8*15 4pcs
#67 M6*10 2pcs
#71 OD20*ID8.5*1.5 4pcs
#75 S13-17
#68 M 4*12 2pcs
#75 S 13-17
2
68
26
1
71
60
71
60
ASSEMBLY INSTRUCTIONS
STEP 1:
NOTE: We recommend having 2 people to assemble
66
the product.
71
Turn over the Slide Rail (No.3) and Seat (No.36) as
above.
Slide the Seat (No.36) onto the Slide Rail (No.3).
Secure the Stopper (No.35) with 2 Flat Cross
36
Screws (No.67). Then attach the Rear Stabilizer
(No.4) to the Slide Rail (No.3) with 4 Washers
(No.71) and 4 Outer Hex Screws (No.66). Tighten
with Spanner (No.75).
STEP 2:
68
Attach L & R End Caps (No.25 & 26) to Front
Stabilizer (No.2). Then tighten with 2 Cross Screws
(No.68) using Spanner (No.75).
25
STEP 3:
#60 M8*15 8pcs
Keep the Main Frame (No.1) upright. Attach Front
#71 OD20*ID8.5*1.5 8pcs
#74 S5
Stabilizer (No.2) to Main Frame (No.1) using 8
Washers (No.71) and 8 Screws (No.60). Tighten with
Allen Wrench (No.74).
Note: You can put 3~4 screws into the holes first, and
start tightening by hand. After all the screws are put in,
then tighten with the tool.
71
60
60
71
2
7
Tabla de contenido
