Idiomas disponibles
Idiomas disponibles
ASSEMBLY INSTRUCTIONS
7. Attach the Slide support (18) to the Back panel (3), using M4x15mm
Screws (16);
Then attach the Drawer Slides (17) and insert it into the mount, lock
the Drawer Slides (17) to Door frame (8) with using M4x15mm
Screws (16).
Hardware Used
16
M4x15mm Screw
17
Drawer Slides
18
Slide support
8a. Find Drawer Front (9), Drawer back panel (12)and Drawer bottom
panel (13).
8b. Match up "G" label on Drawer bottom panel (13) with "G" label on
Drawer Front (9) ,"H" label on Drawer bottom panel (13) with "H" label
on Drawer back panel (12) and click together. Make sure there are no
gaps between the three panels.
9a. Find Left side drawer panel (10) and Right side drawer panel (11).
9b. Match up "I" label on Drawer bottom panel (13) with "I" label on Left
side drawer panel (10), then match up "J" label on Drawer bottom pan-
el (13) with "J" label on Right side drawer panel (11) and click together.
Make sure there are no gaps between the three panels.
7
16
18
x 8
1
x 1
x 2
8
Click
12
H
H
13
G
G
9
Click
9
Click
13
J
I
I
10
Click
6
ASSEMBLY INSTRUCTIONS
10. Peel and stick four silicone pads (21) onto the inside corners of each
drawer, Then attach the drawer box to the base cabinet.
17
Note:
1. If you need to remove the drawer, please press the Release Levers on
the mechanisms pre-attached underneath the drawer kit at both ends.
2. If necessary, you can push the Adjustment Clips on the bottom
mechanisms to adjust the top and bottom gaps of the drawer.
Hardware Used
16
21
Silicone pads
11. In & Out Adjustment: Turn screw (a) clockwise or counterclockwise.
Up & Down Adjustment: Turn screw (b) clockwise or counterclockwise.
Left & Right Adjustment: Turn screw (c) clockwise or counterclockwise.
Than,Peel and stick two silicone pads (21) onto the inside corners of
door.
Hardware Used
21
Silicone pads
Toe Kick Assembly Instructions
NOTE: Toe Kick need to be purchased separately.
12a. Install Front clasp (15) in front of the base cabinet leg, then install the
appropriate length size of the Toe Kick and press down the clasp to
11
secure the Toe Kick.
Hardware Used
J
15
Front clasp
10
21
1
x 4
Release Lever
Adjustment Clip
11
x 2
21
12
x 2
15
7
a
b
c
2
