Craftsman 917.28852 Manual Del Operador página 28

TROUBLESHOOTING CHART:
See appropriate section in manual unless directed to Sears service center
CAUSE
,, _,,,,,,,, . ............
1 Out offue[. 1
2 Engine not "CHOKED" properly, 2
3 Engine flooded.
4 Bad spark plug.
5 Dirty air fiiter.
6 Dirty fuel filter,
7 Water in fuel,
3
4
PROBLEM
Will not start
Hard to start
Engine will not
iturn over
Engine clicks but
will not start
5
6
7
i 8 Loose or damaged widng. 8
i 9 Engine valves out of adjustment, 9
1 Dirty air filter. 1
2 Bad spark p]ug, 2
3 Weak or dead battery, 3
4 Dirty fuel filter. 4
5
Stale or dirty fuel. 5
6
7
1
2
3
4
5
6
7
8
9
Loose or damaged wiring. 6
Engine valves out of adjustment. 7
Clutch/brake pedal not depressed, 1
Attachment clutch is engaged, 2
Weak or dead battery. 3
Blown fuse. i 4
Corroded battery terminals, i 5
Loose or damaged wiring, 6
Faulty ignition switch. 7
Faulty solenoid or starter. 8
Faulty operator presence 9
switch(es).
1
2
3
4
Weak or dead battery.
Corroded battery terminals,
Loose or damaged wiring.
Faulty solenoid or starter,
2
3
4
CORRECTION
Fill fuel tank.
See "TO START ENGINE" in
Operation section,
Wait several minutes before
attempting to start.
Replace spark plug.
CIeaWreplace air filter.
Replace fuel filter.
Empty fueI tank and carburetor,
refill tank with fresh gasoline and
replace fuel filter,
Check alI wiring.
Contact a Sears or other qualified
service center.
Clean!replace air filter.
Replace spark plug.
Recharge or replace battery.
Replace fuel filter.
Empty fuel tank and refill tank witt_
fresh, clean gasoline.
i Check all wiring.
Contact a Sears or other qualified
service center.
Depress clutch/brake pedal,
Disengage attachment clutch.
Recharge or replace battery.
Replace fuse.
Clean battery terminals.
Check all wiring.
Cheek,/replace ignition switch,
Check!replace solenoid or starter.
Contact a Sears or other qualified
service center,
Recharge or replace battery,
Clean battery terminals,
Check all wiring,
Check!replace solenoid or starter,
28