check the appliance electrical suitability at a Technical Service Center.
power, to avoid hazards to the operator and for the safety of the environment
where they work.
shock.
The appliance must not be used if it has been dropped, if there are visible signs
of damage or leaks of water. Do not use the appliance if the power cord or
the plug are damaged, or if the appliance is faulty. To prevent any accident, all
repairs, including the replacement of the power cord, must be carried out by an
.
the same power outlet. Danger of electric overload.
Make sure that the heating element and the outside of the inner pot are clean
and dry before inserting the mains plug into the wall socket.
Unplug from outlet when not in use and before any maintenance or cleaning.
Warning – material damage
controlled systems.
and accessories approved by the manufacturer.
have cooled down, the appliance can be cleaned only using a non-abrasive cloth,
slightly damped with water and a few drops of mild non-aggressive detergents
.
16