Idiomas disponibles
Idiomas disponibles
KNOW YOUR UNIT
A. INTRODUCTION
Your blower is a high performance product designed
for tough jobs.
Special Features include:
• Top handle for one-handed operation.
• Anti-Vibration Handle.
• Weight - 12 lbs. (5.5 kg)
• Convenient upright storage.
• Bear Assist Handle for versatile operation.
• Available Gutter Attachment Kit
• Vacuum capability is included.
NO.
CARTON CONTENTS
QTY.
1.
Engine
1
2.
Blower Tube
1
3.
Nozzle
1
4.
Vacuum Bag
1
5.
Upper Vacuum Tube
1
6.
Lower Vacuum Tube
1
7.
Elbow Tube
1
8.
Operator's Manual
(not shown)
B. UNPACKING INSTRUCTIONS
1. Remove contents from the carton if you have not
done so.
2. Check, parts against the Carton Contents list.
3. Examine parts for damage, Do not use damaged
parts.
4. Notify your Service Dealer immediately if a part is
missing or damaged.
NQXEl It is normal to hear the fuel filter rattle in an
empty fuel tank.
MOTE; Your unit has been factory tested and the car¬
buretor precisely adjusted. Therefore, it is possible
to smell gasoline or to find a drop of oil/fiiel residue
on the muffler.
«
\
ASSEMBLY
A. PREPARATION
Your Operator's Manual has been developed to help
you assemble the unit and to understand its safe opera¬
tion. It is important that you read your manual com¬
pletely to become familiar with the unit before you be¬
gin assembly If you have any questions or need further
assistance, call our CUSTOMER ASSISTANCE
HELPLINE at 1-800-554-6723.
1. READ YOUR OPERATOR'S MANUAL(S).
2
. No tools are required for assembly.
N-QTEt To ease assembly, lubricate locking tabs
before assembling tubes.
B. BLOWER TUBE ASSEMBLY
1. Locate the two locking tabs on the side of the blower
tube.
Figure 1.
2. Align the retention grooves on the nozzle with the
locking tabs on the blower tube and push the nozzle
onto the blower tube.
3. Turn nozzle clockwise until parts snap into place.
Figure 1
4. Align retention grooves on the blower tube with the
locking tabs in th e blower outlet and push the blow¬
er tube into the blower outlet, figure 1.
5. Turn tube clockwise until parts snap into place.
