Stiebel Eltron CNS 50 Instrucciones De Utilización Y Montaje página 6

Servicing
Do not use abrasive or aggressive cleansers to
clean the heater.
Use a vacuum cleaner regularly to clean the
upper and lower air grids (fig. 4).
Installation instructions
Attention!
The installation, electrical connection and first
operation of this appliance should be carried
out by a qualified installer.
The company does not accept liability for
failure of any goods supplied which have not
been installed and operated in accordance
with the manufacturer's instructions.
This convector heater must be installed by an
authorised serviceman in conjunction with these
instructions.
These installation instructions belong to the
heater and must be handed on to the successor
if the heater is sold.
Stiebel Eltron convector heaters are direct
electric heaters designed to be mounted on the
wall and are particularly suitable for heating
smaller rooms such as utility rooms, kitchen,
bath- and washrooms etc.
The convector heater is supplied with a lead.
The convector heater must not be mounted
immediately below a wall socket.
Type
Connecting power
Breadth
Heigth
Depth
with wall mounting
Measure A
6
(for the professional)
CNS CNS
50 75
W 500 750
mm 384 384
mm 440 440
mm 80 80
100 100
104 104
Fig. 4
During the just operation, the heater
may give off a smell. Ensure that the
room is ventilated (for example, open a
window).
Fig. 5
Attaching the wall mounting bracket
The wall mounting bracket is oriented centrally
(see fig. 5 and the following table).
Use the wall-mounting bracket as a template for
positioning the heater correctly and providing
the correct distance from the floor (fig. 6).
Place the bracket on the floor. Mark the screw-
holes through the drill holes ( ).
CNS CNS CNS
100 125 150
1000 1250 1500
456 528 600
440 440 440
80 80
100 100 100
176 176 320
CNS CNS
175 200
1750 2000
672 744
440 440
80 80 80
100 100
320 464
CNS
250
2500
888
440
80
100
464