Num'axes PIE1037 Manual De Instrucciones página 20

Flash LED
Photo Resolution
Night Mode
Multi shot
Video resolution
Video length
Cam PIR
PIR Switch
PIR Sensitivity
PIR Interval
Time Lapse
Working timer No 1
MENU
Exit
PIR
Settings
PIR switch
PIR sensitivity
PIR interval
Time Lapse
PIE1037 - Indice B Octobre 2019
All / Part
All: all 57 infrared LED will work in dark environment.
Part: the bottom 30 infrared LED will be turned off.
12MP (4032x3024) / 8MP (3264x2448) / 5MP (2560x1920)
Maximum range / Balanced / Minimum blur
Maximum range: this setting offers a longer exposure time to extend the infrared flash range for a
better night vision (lower quality image).
Minimum blur: this setting offers a short exposure time to minimize motion blur for a better image
quality (shortened infrared flash range).
Balanced: this setting offers a combination of the above 2 options.
1 photo / 2 photos / 3 photos / 4 photos / 5 photos
Programmable From 1 up to 5 photos per trigger
FULL HD 1080P (1920x1080) / HD 720P (1280x720) / WVGA (848x480)
05-59 seconds
4G Other
ON
OFF
OFF
OFF
OK Set
Programmable options (default settings in bold characters)
OFF / ON
With the PIR switch OFF, the PIR sensor will be turned off and the camera will not be able to take
photos/videos per motion activation.
With the PIR switch ON, the PIR sensor will be turned on and the camera will be able to take
photos/videos per motion activation even when the Time Lapse setting will be ON.
High / Medium / Low
High sensitivity:
1) is more sensitive to movements by smaller subjects;
2) offers longer detection distance;
3) makes it easier for the PIR sensor to detect a difference between body heat and outdoor
temperature;
4) makes it easier to trigger the camera.
In high temperature environment, subjects body heat and environment temperature are hard to tell by
the camera, the suggested setting is high.
It is recommended to use low PIR sensitivity in environments with lots of interference like hot wind,
smoke, near window, etc.
OFF / ON
Select ON then press OK to set the time interval that you desire between photos/videos upon
motion. This option avoids camera taking to many photos or videos.
Example: if the PIR interval is 00:01:00, the camera will wait 1 minute between photo/video recordings
with motion.
Configurable PIR Interval (HH:MM:SS): from 00:00:05 to 23:59:59.
OFF / ON
With Time Lapse ON, the camera will capture photos or videos automatically at a preset time interval
regardless of whether motions are detected or not.
Select ON then press OK to set the interval; the camera will shoot photos or video clips
automatically upon the user set interval. Object motion can still trigger the camera to take
photos/videos if the PIR Switch is ON.
Cam PIR
Working timer No 2
MENU
Exit
4G Other
OFF
OK Set
20/68