Dometic GROUP BUTTNER TEMPRA TLB100 Guía Breve De Instalación página 6

EN
5 Target group
The electrical power supply must be con-
nected by a qualified electrician who has
demonstrated skill and knowledge related
to the construction and operation of electri-
cal equipment and installations, and who is
familiar with the applicable regulations of the
country in which the equipment is to be in-
stalled and/or used, and has received safety
training to identify and avoid the hazards in-
volved.
6 Intended use
The battery is intended to provide energy to the appli-
ances and equipment in a motorhome. The battery is in-
tended to be used with 12 V electrical systems.
This product is only suitable for the intended purpose
and application in accordance with these instructions.
This manual provides information that is necessary for
proper installation and/or operation of the product.
Poor installation and/or improper operating or main-
tenance will result in unsatisfactory performance and a
possible failure.
The manufacturer accepts no liability for any injury or
damage to the product resulting from:
• Incorrect installation, assembly or connection, in-
cluding excess voltage
• Incorrect maintenance or use of spare parts oth-
er than original spare parts provided by the manu-
facturer
• Alterations to the product without express per-
mission from the manufacturer
• Use for purposes other than those described in
this manual
Dometic reserves the right to change product appear-
ance and product specifications.
7 Operation
NOTE Always charge the battery completely
before using it to its full potential.
6
Activation
The factory setting for the battery is the inactive mode:
No voltage is present at the terminals. To use the battery
it must be activated and switched on.
page 3
1. Ensure that the DIP switch 6 (1) is set to the on posi-
tion (factory setting).
If other devices are connected to the battery via the
BUS (4), ensure that DIP switch 5 is set to the on po-
sition (factory setting).
2. Press and hold the On/Off switch (2) for 1 s.
The battery is active when the LED (3) lights up.
Shutting down
The battery can be switched off in four different ways:
• With the display button
• With the On/Off switch
• With the DIP switch 6
• With the smartphone application
Fig.  on page 3
To switch off the battery on the display press and
hold the button until the message "Shutdown" is
displayed. The battery will turn off with the Blue-
tooth® function remaining active.
Fig. 
To switch off the battery together with the Blue-
tooth® function, press and hold the On/Off
switch (2) for 8 s until the LED (3) starts flashing in
purple.
To switch off the battery leaving the Bluetooth®
function active, press and hold the On/Off switch
(2) for 4 s until the LED (3) starts flashing in blue.
To deactivate the battery for a longer time (e.g.
for storage), push the DIP switch 6 (1) into off posi-
tion.
Shutting down by the smartphone
application
Fig.  on page 4
1. Tap on the menu icon (1).
2. Tap on the Bluetooth® icon (2).
3. Tap on the battery disconnection icon (3).
Fig.  on