LEITZ IQ Slim Home Office P4 Instrucciones De Uso página 5

Indicator Panel Icon
Power On
BUTTON
Reserve BUTTON
Shredding
in operation
INDICATOR
Cooling Down
INDICATOR
Auto reverse
indicator
Operation
1. Remove shredder from packaging and place shredder head on
top of the bin.
2. Connect shredder to an appropriate mains supply. Ensure
the on/off switch is in the On position. The blue shredder in
operation icon will flash every 3 seconds.
3. To commence shredding press and release the
flashing icon changes to a solid blue light.
You are now able to shred.
4. Insert paper to be shredded into the feed slot 'e'.
While paper is being shredded the blue shredder in operation
icon will remain illuminated.
Note: Make sure the paper to be inserted is neatly stacked.
If the paper thickness is within the shredder's capacity, the
motor will start and your documents will be shredded. The
cutters will stop once the shredding process is complete.
5. If the paper thickness is greater than the shredder's capacity
the auto reverse icon will flash red
reverse.
6. If this happens, remove some of the sheets from the paper
stack and re-try. The shredder will automatically start and allow
the paper to be shredded.
Warning: Do NOT under any circumstances use any
metal objects (scissors, letter openers etc.) in an attempt
to clear the paper entry.
Colour
White Press to turn on
shredder
Press to manually
remove paper
Blue Constantly
illuminated
Red Illuminates when
shredder is cooling
down
Red Flashes when
motor is in reverse
button. The
and the motor will run in
Warning symbols
No CDs
Keep loose jewellery clear
No credit cards
Ties and loose clothing hazard
Keep long hair clear
Do not reach into opening
This equipment is not intended for use by children
Manual feed slot capacity
No aerosols
Rare occasions of jamming
Should the paper jam not clear, press and hold the
for 2 seconds, then press and hold the
Repeat until the jam has cleared. Please do not alternate between
the Reverse and Forward functions quickly as this may damage
the motor.
Reverse function
1. Should you wish to reverse the shredding direction whilst
shredding a document a reverse function
your convenience.
2. By pressing and holding the reverse button the cutters will
change direction allowing the retrieval of the document being
shredded.
3. The reverse function will only run whilst
When the reverse button has been released the shredder will
revert to ready mode.
Operation time
When the shredder is used continuously for 6 minutes or more the
shredder may overheat. If this occurs the overheat icon
illuminate red.
When the shredder is ready to be used again the red overheat icon
will go out. This will take approx. 60 minutes.
To resume shredding, press the On button and start feeding
documents into the feed slot.
Quiet shredding
This shredder has been designed with quiet shredding technology.
This allows you to shred with peace of mind you will not disturb
others.
button
button for 2 seconds.
has been fitted for
is being pressed.
will
5 5 5 5