Idiomas disponibles
Idiomas disponibles
1.
Lift seat for bolt access.
2.
Disconnect
BLACK
battery
cable
then
RED battery
cable.
3.
Remove
battery
bracket
bolt.
4.
Install
new battery
with terminals
facing
to the right, and away from seat as
shown.
5.
Reinstall
battery
bracket
and bolt.
6.
First connect
RED battery
cable to posi-
tive (+) battery
terminal.
7.
Connect
BLACK
grounding
cable
to
negative
(-) battery
terminal.
Fender
Battery
Bracket
ENGINE
Your engine speed has been factory set. Do
not attempt to increase engine speed or it
may result in personal injury. If you believe
that the engine is running too fast ortoo slow,
take your riding mower to a qualified service
center for repair and/or adjustment.
Your
carburetor
is not
adjustable.
If your
engine
does
not operate
properly
due to
suspected
carburetor
problems,
take your
riding
mower
to a qualified
service
center
for repair
and/or
adjustment.
IMPORTANT:
Never tamper
with the engine
governor,
which
is factory
set for proper
en-
gine speed. Overspeeding
the engine
above
the factory
high speed setting can be danger-
ous.
If you think
the engine-governed
high
speed
needs
adjusting,
contact
a qualified
service
center, which
has proper
equipment
and
experience
to
make
any
necessary
adjustments.
INTERLOCKS
AND RELAYS
Loose or damaged wiring may cause your
riding mower to run poorly, stop running, or
prevent it from starting.
• Check wiring. Make sure all wiring and
connectors
are secure.
TO REPLACE
FUSE
Replace
with 4 amp.
or 5 amp.
automotive
type plug-in
fuse.
The fuse holder
is located
under the fender.
23
