F_
WARNING:
Risk of Bursting
Air Tank: The following conditions could lead to a weakening
of the tank, and result
in a violent tank explosion and could cause property damage or serious injury.
2.
3.
What Could Happen
Failure to properly drain
condensed water from tank,
causing rust and thinning of the
steel tank.
How To Prevent It
Drain tank daily or after each use. If
tank develops a leak, replace it
immediately
with a new tank or replace
the entire compressor.
Modifications
or attempted
repairs
to the tank.
Unauthorized
modifications
to the
unloader valve, safety valve, or any
other components
which control
tank pressure.
Excessive vibration can weaken
the air tank and cause rupture or
explosion
Never drill into, weld, or make any
modifications
to the tank or its
attachments.
4.
The tank is designed to withstand
specific
operating pressures. Never make
adjustments
or parts substitutions to
alter the factory set operating
prossuros.
ATTACHMENTS
& ACCESSORIES:
Exceeding the pressure rating of air
tools, spray guns, air operated
accessories,
tires, and other inflatables
cart cause them to explode or fly apart,
and could result in serious injury.
For essential control of air pressure, you
must install a pressure regulator
and
pressure gauge to the air outlet (if not
equipped) of your compressor.
Follow the
equipment manufacturers
recommendation
and never exceed the
maximum
allowable pressure rating of
attachments.
Never use compressor
to
inflate small low pressure objects such
as children's toys, footballs,
basketballs,
etc.
,l:_'!'J ; l =
WARNING: Risk from Flying Objects
WHAT CAN HAPPEN
HOW TO PREVENT IT
The compressed
air stream can cause
soft tissue damage to exposed skin and
can propel dirt, chips, loose particles,
and small objects at high speed,
resulting in property damage or personal
injury.
Always wear ANSI Z87.1 approved safety
glasses with side shields when using the
compressor,
Never point any nozzle or sprayer
toward any part of the body or at other
people or animals.
Always turn the compressor
off and
bleed pressure from the air hose and tank
before attempting
maintenance,
attaching
tools or accessories.
5* ENG
D27312