Idiomas disponibles
Idiomas disponibles
Operating Instruction for
AC Line Splitter
K-SEPARADOR-L - 0767481
1.
WARNING
• Read understand and follow Saf ety Rules and operating instructions in the manual bef or e using this this tester .
• The tester ' s safety features may not protect the user if not used in accordance with the manufactuer's instructions.
• For use on The European standard 230 volt AC outlets only.
• Special care should be taken when measuring voltages above 25V AC because of the hazards
• 16 amps A C maximum, do not test electrical devices that ex ceed 16 amps.
2.International Safety Symbols
Potential banger , Indicates the must refer to the manual for important safety information.
Indicates hazardous voltages may be present.
3.Introduction
• The AC Line Splitter provides a safe and easy way to measure the AC current of plug-in appliances and other
electrical devices.
• Appliance and lamp pow er cords have two insulated wire conductors: the hot or live conductor and the neutral
and gr ound conductors.
• Installing a clamp meter around both conductors will result in a reading of approximately zero amps because the
current flowing through the live or hot wire will effectively cancel out the current flowing back through the neutral
and ground wires.
• The AC Line Splitter conveniently "Separates" the hot from the neutral and ground conductors, eliminating the
need to physically separate the wires on the power cord.
• The line splitter increases the current reading by ten times allowing higher resolution when measuring low current.
• Remember to divide the current measurement shown on the clamp meter display by 10. A reminder to "Divide By
10" is model into the body of the line splitter.
• With proper use, the AC Line Splitter will pr o vide many y eas of reliable service.
1
4.Description
1-Plug
2-Ring for Line Current Measurement x10
3-Ring for Line Current Measurement x1
4-Input Terminals for L-N, L-PE, N-PE Voltage Measur
5-Socket
5.General Specifications
V oltage Rating (Maximum)
250V AC, 50/60Hz
AC Current (Maximum)
16A
Operating Temperature
0 to 50°C (32 to 122°F)
Storage Temperature
-20 to 60°C (-4 to 140°F)
Humidity
Max 80% up to 31°C (87°F) decreasing linearly to 50% at 40°C (104°F)
Altitude
2100 meters (7000 feet) maximum
Safety Compliance
CAT III 300V
2
