Idiomas disponibles
Idiomas disponibles
ALARM
This device provides the possibility of setting up two alarms, with DAB or FM
tuning or ringing (buzzer).
Set an alarm
Press and hold the MENU / INFO button while the product is on, select "System" with
the REAR or FORWARD buttons and press the SELECT / SCAN button to enter the
product settings menu. Select "Alarm clock" to display the alarm settings :
Select the desired alarm clock (Alarm 1 or Alarm 2) and confirm the selection
1.
with the SELECT / SCAN button.
Time : Define the desired time with the BACK and FORWARD keys and confirm
2.
with SELECT / SCAN.
Source : Select which source to use for the alarm (DAB, FM or ringtone) using
3.
the BACK or FORWARD keys and confirm with SELECT / SCAN.
If you choose DAB or FM radio as the source, it will be possible to select the
4.
desired station among those saved in the presets using the REAR or FORWARD
keys, then confirm with SELECT / SCAN. "Last Listened" selects the last station
that was listened to. This is the only option available if no preselection is present.
Set the alarm repetition (once, every day, week or weekend) with the BACK
5.
or FORWARD keys and confirm with SELECT / SCAN.
If the repetition is set to "Once", it will be possible to choose the date on which to
6.
set the alarm with the BACK and FORWARD keys, then confirm all the values
with SELECT / SCAN.
Adjust the alarm volume with the BACK and FORWARD keys and confirm with
7.
SELECT / SCAN. It is not possible to set a volume lower than 4. When the alarm
is activated, the product gradually reaches the programmed volume.
Alarm clock : Select "On" and confirm with SELECT / SCAN to activate the
8.
established alarm, or "Off" to save the alarm settings without activating it.
If you want to edit a previous field, press MENU / INFO to go back.
When the alarm setting is active, press the POWER button and the device goes into
standby even if it is powered by battery. An icon is displayed to indicate that the alarm is
active.
If the device does not have a set date and time, the system prompts the user to enter
them manually before an alarm can be set. Alternatively, tune in to a DAB / FM station to
allow the device to automatically update the date and time (NB There may be stations
that do not provide the date and time. time).
Snooze / Stop the alarm
At the programmed date and time, the device emits an alarm sound or tunes to the
established station. To temporarily silence the alarm, press the SELECT / SCAN
button to activate the Snooze function. The display shows a countdown to the next
activation of the alarm. Once the Snooze function is activated, it is possible to extend
its duration by pressing the SELECT / SCAN button again.
until the desired time (5, 10, 15 or 30 minutes). While the Snooze is counting down, the
alarm will be deactivated if the device is turned on.
To cancel the alarm, press the POWER button. The message "Alarm deactivated" is
displayed.
If you want to deactivate an established alarm, perform the alarm setting procedure
again and, once you have reached the "Wake-up" option, select "Off".
E-9
