Idiomas disponibles
Idiomas disponibles
RANGEFINDER CONFIGURATION
PROGRAMMING SEQUENCE
Note – By using the free Sig BDX App you can easily program and configure your rangefinder.
1. Mode Selection (AMR, LOS, ARCH, BDX-U or BDX-X)
To enter programming mode, press and release the RANGE button to wake-up the rangefinder.
Once the display is visible, press and hold the MODE button for 2 seconds – then release the
MODE button and the current selection will be flashing (AMR is the default setting). You can
switch between AMR, LOS, ARCH, BDX-U or BDX-X by pressing and releasing the RANGE
button. Confirm your selection by pressing and releasing the MODE button which will save
your setting and index to the next setting for configuration. If you do not press and release the
MODE button the rangefinder will save your selection and turn off. If the user intends to use a
calculated ballistic solution, the rangefinder must be in BDX-U or BDX-X mode. Instructions
for downloading and configuring the BDX App on your smartphone will be detailed later in the
instructions
28
