universalblue UVPA1500-20 Manual De Instrucciones página 22

Ventilador de pared
Idiomas disponibles

Idiomas disponibles

 Before cleaning the appliance, disconnect it from the power
supply, unplug the cable and allow the fan to complete stop.
 Using a 1" (25 mm) dry brush, remove dust from the grilles.
 Fan components should be cleaned with a drop of mild soap
and a damp cloth or sponge. Do not allow any water or other
liquid to enter the motor housing.
 Completely remove the soap with a cloth.
 If the appliance is not to be used for some time, place the
fan in its original packaging and store it in a clean, dry place.
 If it is necessary to change the mains plug, proceed as
follows:
o Connect the brown wire to the terminal labeled "L".
o Connect the blue wire to the terminal labeled "N".
o If the plug is equipped with a 13 A fuse, replace it with
o Make sure that the cable handle is correctly positioned
Do not use harsh detergents, chemical cleaners or solvents
as they may damage the surface of the fan components.
6. AFTER SALE SERVICE
This appliance has a warranty of 2 years from the date of purchase,
considering the following notes:
 The guarantee is valid only on presentation of the product's
purchase invoice.
 Damage caused during transport, negligence or misuse,
incorrect assembly or installation, as well as external
influences such as: atmospheric or electrical rays, flooding,
humidity, etc. are not covered by the warranty.
 Damage caused as a result of improper installation, power
connection (electricity, water, gas), drainage and disposal is
also not covered by the warranty.
 Aesthetic damage (such as scratches, chips, etc.) arising
from use are not covered by the warranty.
a 3 A fuse.
(above the outer sheath of the cable) and that it is fully
tightened.
22
loading

Este manual también es adecuado para:

Uvpa1503-24