Ryobi Pi1824QBT Guía De Consulta

Pre-chill cooler and food and/or
1
beverages before loading. Allow
warm contents to chill for five hours
(see page 7).
Use the AC adaptor to power the cooler
2
before transporting (see page 7).
Use the DC adaptor to power the cooler
3
when securely transporting the cooler in a
vehicle (see page 7).
Pi1824QBT QUICK REFERENCE GUIDE
WARNING:
This Quick Reference Guide is not a substitute for reading the operator's manual. To reduce the
risk of injury, user must read and understand operator's manual before using this product. All page
references refer to the operator's manual.
POWER COOLER BEST PRACTICES
Use 18V battery/batteries to power the
4
cooler when an AC/DC power supply is not
available (see page 7).
Set cooler to the recommended temperture for products being stored (see page 8).
6
Use the chart below to determine the recommended temperature for common foods and beverages.
Press (+) to increase the temperature setting. Press (-) to decrease the temperature setting.
RECOMMENDED TEMPERATURE FOR COMMON FOODS
Drinks Fruits
41°F 41-46°F
7
Press the settings button to select ECO mode to conserve battery life (see page 8).
While the cooler is running, press and hold the settings button for three seconds until the screen flashes.
Press the settings button again to select protection mode H (high), M (medium) or L (low).
NOTE: Set battery protection mode to H when the cooler is connected to the 12V auto accessory port. M and
L should be set when the cooler is connected to a portable battery or other battery back-up devices (see
page 8).
Veggies Deli
37-50°F 39°F
BATTERY PROTECTION MODE
Do not keep the cooler storage compart-
5
ment lid open longer than necessary.
Wine Ice Cream
50°F 14°F
SETTINGS BUTTON
10-18-22 (REV:01)
Meat
0°F
999000164