Idiomas disponibles
Idiomas disponibles
EN
Service:
Power button - long press the power button will turn on the device,
short press will switch the operating mode.
1. RF + red light + vibration
2. RF + red light
3. RF + vibration
4. RF radio frequency
Intensity level switch button (adjusts RF intensity only)
How to use:
1. Apply an appropriate amount of eye cream to previously cleansed
skin. Spread it evenly.
2. Press the power button to turn on the device, short press the
power button to switch the working mode, and short press the power
button to adjust the RF intensity.
3. Use the massage head as shown for massage
in the drawing.
4. After use, wipe the massage head with a dry or paper towel.
Storage:
1. Eye care products should be distributed evenly before each
treatment to avoid excessive accumulation of eye care products in
the massage head.
2. After each treatment, wipe the product with a dry towel.
3. Do not wash the device under water or submerge it. The device is
not waterproof
4. Do not use corrosive agents to clean the device.
5.Store it in a cool, dry place.
6. Do not use the device if it is damaged.
7. Do not press the device against the skin with great force.
Charging method:
1. At low power level, turn off the device and connect to charge.
2. During the charging process, the battery symbol on the display
flashes.
3. Charge your device regularly to avoid battery aging.
4. Once charging is complete, disconnect the charger from the
device.
Precautions:
1. Follow the recommended operating instructions. If your eyes have
inflammation such as conjunctivitis, you should not use this device
until it is completely healed. Do not use this product while wearing
contact lenses.
2. Remove all metal elements from the facial area before using the
massager, such as earrings and necklaces.
3. Do not use the Looky PRO device while charging.
4. Do not repair, disassemble or modify the device yourself. Any
irregularities should be assessed by the service.
5. Please do not drop or hit the device to avoid it malfunctioning.
7
