Idiomas disponibles
Idiomas disponibles
ENGLISH
NAMES AND FUNCTIONS OF PARTS
FRONT PANEL
DENON
precision AuDt COMPGNENT/AM-FM STEREO TUNER TU-560
punks
wawr or alo aKa
cH
mitt
0.0
OMxz
iC LIMEMO
STEREO
MONO
= AUTO.
MANU
1)
POWER
(Power ON-STANDBY/OFF
Switch)
The unit works 2 to 3 seconds after this switch is turned on.
When the power is turned off by remote control, the unit is
set to the standby mode (the unit is still connected to the
AC line) and the STANDBY indicator (the first signal LED)
lights. Set the power switch to the OFF position when not
using for long periods of time.
Q
Ten Key Buttons
Used to specify numbers
for Memory
and Preset Call.
Channels 1-30 can be specified using these PUnHs,
Preset Call Setting Method
A station that has already been preset can be fetched by the
following method.
Pressing [, [2],
in order fetches the station
present
in memory
for channel
12.
3)
ENTER (Enter Button)
Used for setting Memory, and Preset Call.
6
TUNING
(Tuning
Buttons)
Used
to change
the
received
frequency
to a higher
frequency (UP) or a lower frequency (DOWN).
©
BAND (Band Button)
Selects between FM or AM.
TU-560L:
Pressing this button changes the tuner from FM
to MW to LW, then back to FM, in that order.
@
ANTENNA (Antenna Switching Button)
Use this button to switch the antenna to receive a cable
station or a regular station.
The antenna modes can be stored in the memory.
@
AUTO MUTE/MANU (Tuning Mode Button)
This switches between auto and manual tuning.
Auto tuning: When the UP button is pressed, the radio is
tuned
automatically
to a higher frequency.
Press
the
DOWN key to tune to a lower frequency. Use this position
to eliminate noise when no signals or weak signals are
being
received.
Manual tuning: In this position, the radio can be tuned
manually.
TU-560L:
Not available in this model, during reception of
LW
only:
MEMORY
(Memory Button)
Used
to
store
the
frequency
of the
station
currently
received.
Pressing
LMEMORY ], (7), [2], [ENTER]
in order stores the
station on channel 12 in memory.
Up to 30 channels of
either FM
or AM
can
be stored
in memory.
MEMO
(Memory Indicator)
This indicator
lights when
the MEMORY
button
@ is
pressed.
Channel Indicator
This displays the number
of the channel
at which the
station is stored.
Digital Frequency Indicator
Reception frequencies are digitally indicated with numbers.
The FM frequency unit is MHz; the AM frequency unit is
kHz.
SIGNAL (Signal Indicator)
This lights when a station can be received.
STEREO/MONO
(Stereo/Mono
Indicator)
"STEREO"
lights automatically
when
receiving
a stereo
broadcast.
"MONO" lights when receiving a monaural broadcast or no
broadcast at all.
AUTO/MANU
(Auto/Manual
Tuning
Mode
Indi-
cator)
Pressing MODE @ causes "AUTO" and "MANU" to light up
alternately.
TU-560L:
Pressing this button does not switch the tuner to
Auto Tuning
Mode,
during
reception
of LW
only.
SIGNAL (Signal-Strength Indicators)
The number of LEDs that light increases in correspondence
with the strength of the signal being picked up by the
antenna.
ANTENNA
(Antenna
Indicator)
The "NORMAL" or "CABLE" LED lights to indicate whether
in the normal
or cable mode
(controlled
by button
@).
