V2 ELETTRONICA TTNR433PP Instrucciones página 32

CONNECTION OF THE CABLE
KEYPAD TTNC TO THE CONTROL
UNIT PD5-PD7
If you connect the TTNC to a control
unit PD5 or PD7, follow this
diagram.
WARNING:
• Remember to enable the menu of
starting up of the input of data
on the control unit.
• The jumper J1 must be kept
open.
• The cable for the transference of
data must not exceed the length
of 100 meters.
WARNING: To connect the keypad TTNC to other devices, refer to the handbook supplied
with each device
ENGLISH
- 28 -