V2 ELETTRONICA TTNR433PP Instrucciones página 28

3. DIP-SWITCH CODE (only version Royal/53200)
The TTNR433RY sends a steady code "ROYAL" (V2) or a standard code "53200", depending on the
chosen mode. The factory dip-switch code set for channel 1 is 0101010101 00.
CUSTOMIZING OF THE DIP-SWITCH CODE
If other remote controls are already stored on the receiver, the dip-switch code of the keypad has to
be set with the same sequence of the one set on the dip-switch of the remote control.
The dip-switch of the remote control is made up by a series of 12 micro switches set to ON or OFF.
To set the same code on the keypad, it is necessary to key in a code made up of 12 digits: those
will be 0 or 1, depending on the position of the micro switches on the remote control
- micro switch set to ON = 1
- micro switch set to OFF= 0
If the transmitter is single channel, the dip-switch to be set coincides with the position of the 12
micro switches.
If the transmitter is two-channel and the key stored is 2, the dip-switch code to be set coincides
with the position of the 12 micro switches. If the key stored on the receiver is the key 1, the dip-
switch code coincides with the position of the micro switches from 1 to 10 plus the 2 digit 00.
- 24 -
ENGLISH