Idiomas disponibles
Idiomas disponibles
iNSTRUCTiONS
PERTAiNiNG
TO A RiSK
OF FIRE,
ELECTRIC
SHOCK,
OR
iNJURY
TO PERSONS
WARNING-
Some dust created by using power tools contains
chemicals
known to the
State of California
to cause cancer and birth defects or other reproductive
harm
WARNING-When
using
the
product,
basic
precautions
should
always
be
followed,
including
the following:
General:
To reduce
the
risks
of electric
shock,
fire,
and
injury
to persons,
read
all the
instructions
before
using
the
tool.
Work
area
t, Keep
the
work
area
clean
and
well
lighted,
Cluttered benches
and dark areas
increase the risks of electric shock, fire and injury to persons.
2. Do not operate
the
tool
in explosive
atmospheres,
such
as in the
presence
of flammable
liquids,
gases,
or dust.
The tool is able to create sparks resulting in
the ignition of the dust orfumes.
3. Keep
bystanders,
children,
and
visitors
away
while
operating
the
product.
Distractions
are able to result in the loss of control of the tool.
Personal
safety
1. Stay
alert.
Watch
what
you are
doing
and
use common
sense
when
operating
the
product.
Do not
use the
product
while
tired
or under
the
influence
of
drugs,
alcohol,
or medication.
A moment of inattention while operating
the tool increases
the risk of injury to persons.
2. Dress
properly.
Do not
wear
loose
clothing
or jewelry.
Contain
long
hair.
Keep
hair,
clothing,
and
gloves
away
from
moving
paris.
Loose clothes, jewelry, or long
hair increases
the risk of injury to persons as a result of being caught in moving parts.
3, Remove
adjusting
keys
and wrenches
before
turning
the
tool
on. A wrench or a
key that is left attached
to a rotating part of the tool increase the risk of personal
injury.
4, Do not overreach.
Keep
proper
footing
and balance
at all times,
Proper footing
and balance enables better control of the tool in unexpected
situations.
5. Use
safety
equipment.
A dust mask, non-skid safety shoes and a hard hat must be used for
the applicable
conditions.
6. Always
wear
eye protection.
7. Always
wear
hearing
protection
when
using
the
tool.
Prolonged
exposure
to high
intensity noise is able to cause hearing loss.
8. Disconnect
the
product
from
the
air source
before
making
any
adjustments.
9. Avoid
unintentional
starting.
Be sure
the
switch
is off before
connecting
to
the
air supply.
Do not carry the tool with your finger on the switch or connect the tool to the
air supply with the switch on.
