Idiomas disponibles
Idiomas disponibles
REF. 60009
EN
INSTRUCTION MANUAL
PRODUCT'S PRESENTATION
This tool has been designed for finishing processes
such as polishing and rounding off corners and edges,
as well as for achieving smooth surfaces by means of
its wheel and polishing pad.
The rotational speed of the wheel can be adjusted to 9
different selection stages with the regulation dial, and
trigger switch can be locked on for use or locked off for
storage to prevent an accidental starting of the tool.
What's more, this polisher is supplied with a polishing
pad which can be inserted with no need of using any
tool, an Allen key and an auxiliary D handle for a better
grip.
SAFETY INSTRUCTRIONS
WARNING! Read all safety warnings and all ins-
tructions. Failure to follow the warnings and instruc-
tions listed below may result in electric shock, fire and/
or serious injury.
• Check for breakage of parts, damage to switches
and any other conditions that may affect its ope-
ration.
• Disconnect the battery from the polisher and pla-
ce the switch in the locked or off position before
making any adjustments, changing accessories,
or storing the tool.
• Keep the tool and its handle dry, clean and free
from oil and grease.
• Always wear eye and respiratory protection.
• Hold the tool by the insulated grip surface when
performing an operation where the tool may come
in contact with the hidden wiring. Contact with a
"live" wire will make exposed metal parts of the
tool "live" and shock the operator.
• Make sure all keys and adjusting wrenches are re-
moved from the tool before switching it on to avoid
them to fly away at high velocity.
• Make sure the polisher pad is not contacting the
workpiece before turning it on and off, and do not
put the polisher down until it completely stops. A
running tool will jerk when the blade tip contacts
any surface.
• Do not start the polisher if you are standing at in
line with the pad.
• Always hold the polisher with one hand on the rear
handle and the other on the auxiliary handle while
in use, and keep them away from rotating parts.
• Do not overload. Only apply the necessary pres-
sure to avoid the polisher to bounce.
ASSEMBLY
Fitting the auxiliary handle
1. Fit the auxiliary handle into both side holes on the
head of the polisher.
2. Insert the screws into both side holes.
3. Tighten the screws securely by using the Allen
key.
Fitting the polisher pad
1. Press and hold down the spindle lock button to
avoid its rotation.
2. Insert the polisher pad into the spindle and
hand-tightened it.
Variable speed control
There are 9 different speed selection stages: 800,
1000, 1200,1400,1600,1800,2000,2200,2400.
The speed can be adjusted with the speed regulation
dial:
Rotate the speed dial forwards to increase the speed.
Rotate the speed dial backwards to decrease the
speed.
NOTE! The numbering on the speed dial is 800, 1200,
1600, 2000 and 2400. To acquire the speed of 1000 the
speed tuner must be positioned in between 800 and
1200, and the same to achieve 1400, 1800 and 2200
speeds.
OPERATION
CAUTION! Never cover the air vents and keep them
open for a proper motor cooling.
Turning On/Off
To turn it on, depress the trigger switch lock-off button
and slowly depress the trigger switch.
To turn it off, fully release the trigger switch.
Trigger switch lock-off button
The trigger can be locked off for storage or locked on
for use:
· 5 ·
