Idiomas disponibles
Idiomas disponibles
USER MANUAL for OUTDOOR LIGHT
SITRA SPIKE 230374/75
Explanation of the safety warnings:
DANGER:
immediate dangerous situation leading to death or
severe injuries when not avoided.
WARNING:
possible dangerous situation leading to death or
severe injuries when not avoided.
possible dangerous situation leading to injuries or
CAUTION:
material damage when not avoided.
1.
NOTES ON SAFETY
Installation, mounting or works on the electrical connection may
only be carried out by an approved electrician.
Do not cover the product - provide free air circulation!
Do not hang or fasten anything on the product, especially no
decoration.
Keep children away from the product.
Operate the product only when it functions properly:
DANGER
In case of a malfunction you may NOT touch the product or operate it
further. Disconnect the product from the power supply by an external
switch or by the
fuse.
If touched or further operated there is danger from electric shock,
burning, or fire.
A malfunction exists when:
visible damages appear.
the product does not work properly (e.g. flickering).
smoke, steam or crackling sounds appear.
smell of burning is recognisable.
an overheating is recognisable (e.g. by discolouration of adjacent
surfaces).
Operate the product only after maintenance and examination by an
approved electrician!
2.
USE AS DIRECTED
This product serves exclusively lighting purposes and may:
only be used with a voltage of 230V ~50Hz.
only be operated when firmly mounted.
not be exposed to strong mechanical loads or to strong
contamination.
only be installed and operated after a condition inspection if the
product is dirty or has been moistened through storage.
not be modified or converted.
If these points named above are not adhered to, a short circuit or
electrical shock may occur!
3.
OPERATION
Replacing the light source
CAUTION
Exchange the light source always before it reaches its lifespan, to avoid
personal injuries, or damages of the fixture or other objects.
Disconnect the product from the power supply, before you exchange
the bulbs. Let the light source cool down before replacement.
There exists danger of burning!
Use only light sources that are approved for the product. Approved light
sources are indicated on the type label.
Other types of light sources may cause fire risk, damage the product
or lead to malfunction.
Replacing the light source: Loosen the screws on the lamp head
and remove the glass cover. Carefully remove the used light source.
Insert the light source applying a quarter-turn to the right. Now you
can fix the glass cover again. Tighten the screws in a cross-wise
order, to achieve an even pressure on the gasket. Note the proper fit for
the gasket.
Check and clean the gasket after each opening of the fixture. The
bearing surface of the gasket must be free of dirt. These measures
ensure that the IP class is maintained.
The connection cord cannot be replaced when damaged. Do not
operate the product with a damaged connection cord. In this case the
complete product must be disposed.
4.
MAINTANANCE AND CARE
The following enviromental influences may have unwanted effects on
the surface of the product:
acid rain and sour soil
high salt content in the air
thawing salt
cleaning agents
fertilizer especially in flowerbeds
other chemical substances (e.g. herbicides)
Protect the product by adequate means to avoid unwanted changes of the
surface.
WARNING
Disconnect the product from the power supply and let it cool down,
before you do maintenance or clean the product.
If disregarded there may be danger of electric shock or by burning
when cleaning the product.
Cleaning: Clean the product on a regular basis using a slightly
moistened, soft and fluff-free cloth.
5.
ADDITIONAL IMPORTANT NOTES
Storage: The product must be stored in a dry and clean environment. Do
not strain the product mechanically during storage.
Warranty: In case of a warranty contact your dealer.
Disposal: Notes on the correct disposal in Germany are found on
www.slv.de.
SLV Elektronik GmbH
ENGLISH
OUTDOOR LIGHT
SITRA SPIKE 230374/75
Installation manual for the electrician
User manual for the user
Please read carefully and keep accessible for further
reference !
Technical Data:
Operating voltage:
230V ~50Hz
Safety class:
I
Safety type:
IP54
Light source:
GX53, max. 9W
Dimensions (W/H/D):
17 / 27 / 10 cm
Power supply cable
150 cm
L:
Rotary range:
350°
Weight:
0,8 kg
Importer:
SLV Elektronik GmbH
IP 54: Protection against disturbing dust deposition - Protection against
splashing water from all directions.
art.-no. 230374/75
01/2008
©
SLV Elektronik GmbH, Daimlerstr. 21-23, 52531 Übach-Palenberg,
Germany, Tel. +49 (0)2451 4833-0
Technical Details are subject to change.
