Idiomas disponibles
Idiomas disponibles
3.5.1 Pump
1.
Remove the fin and place the product on a flat, stable and horizontal surface.
2.
Unscrew the valve cover.
3.
Make sure the valve pin is down by pushing it down and turning it clockwise.
4.
Attach the black end of the tubing to the pump on the side with the letters "DEF".
5.
Attach the gray end of the tubing to the product and twist clockwise to secure the tubing.
6.
Place the pump on a hard, flat and stable surface. Place your feet on the pump's footrest and
begin pumping.
- It takes about 5 minutes to pump the SUP Board empty.
7.
When the product is deflated, twist the gray end counterclockwise to release the pump.
8.
Roll the product up to remove the last bit of air.
9.
Place the cap on the air valve and turn it clockwise to close it.
3.5.2 Manual
Remove the fin and place the product on a smooth, stable and horizontal surface.
Unscrew the valve cover.
Make sure the center pin is down by pushing it down and turning it clockwise.
Roll up the product to remove the last bit of air.
Put the cap on the valve and turn it clockwise to close it.
24
