Idiomas disponibles
Idiomas disponibles
Using a Double DIN Dash Kit:
4B
Radio chassis mounts to the kit brackets in the sub-dash, not to the kit main frame
Display Adjustment & Mounting:
1. Use all 8 kit mounting screws to attach the radio module & plastic mounting bracket assembly to the
kit brackets at the front most location (not to exceed the front of the kit bracket). (FIG. H)
a. (4x) #10 X 3/8 screws for the bottom locations.
b. (4x) M5 X 10 or (4x) M4 X 10 screws for the radio module locations (use any combination of
screws to locate the radio in the best position).
Note: There are multiple mounting holes on the
plastic mounting bracket to allow adjustment of the
mounting depth. You may drill additional holes in
the mounting bracket and/or the dash kit brackets to
align the display in the best position and ensure you
can use all 8 mounting screws.
2. Install the assembly (from Step 1) into the vehicle
(using factory screws/bolts).
3. Install the dash kit main frame and any factory
panels that would affect the display installation.
Note: If there is a depth issue with the radio
module in the top position, move it to the bottom
location by inverting the mounting bracket
assembly. (FIG. I)
10
FIG. H
M5 X 10
AFTERMARKET
DASH KIT
(NOT INCLUDED)
FIG. I
#10 X 3/8
Coarse Thread Screw
