ENGLISH
4.
The "Add device" message will appear.
5.
Press the "Add" option to add the device.
6.
Enter the Wi-Fi network name and password (remember that only the 2.4Gz network can
be selected).
7.
Wait for the device to connect and tap the "Done" option to enter the control interface.
Connecting the feeder to the APP manually
1.
Add the feeder to the application: after logging into the application, click on the [+] option
in the top right corner to add the feeder, we will go to the "Pet Care" part, look for our
product "Pumba 6000 Purrfect Meal Smart". Finally, follow the linking steps.
Please note
Make sure your phone is connected to a Wi-Fi network with optimal network speeds.
Establishing a schedule or meal plan
You can set a daily feeding schedule for your pet.
Please note
The device consumes power very quickly, so it is recommended not to use batteries as the only
power source, as the battery will only last about 10 hours.
Tips
The battery pack is used as a back-up in case of power failure or power failure. Make sure
1.
to install 4 AA batteries and to plug the device to a power outlet at the same time.
2.
It only works with the 2.4Gz network, do not try to connect to the 5Gz network.
3.
Try placing the device close to the router during connection to ensure a fast connection.
On food portions depending on your pet, breed, size, and type of food, it is advisable to follow
the table on the food itself or follow the instructions of a professional.
Warning
Do not use canned or wet food.
Please note
If your pet has not eaten the previously scheduled meal, reduce the dose of the next meal.
44
PUMBA 6000 PURRFECT MEAL SMART
5. CLEANING AND MAINTENANCE
Both the feeder and the desiccant bracket can be removed for cleaning.
Use a damp cloth to wipe dirt from inside the feeder and from the dispensing outlet.
Rinse the parts and air dry them thoroughly before putting them back into the appliance.
NOTE: for the sake of your pet's health, it is recommended to clean the feeder regularly.
The washable parts of the feeder are: food tank, stainless steel bowl, plastic bracket, lid
(without desiccant bag).
These parts can also be put in the dishwasher or immersed in water.
6. TROUBLESHOOTING
Why can't I connect to Wi-Fi?
Check that you have connected the device correctly and make sure you select the 2.4G Wi-Fi
option instead of 5G.
Why doesn't the device dispense food?
-
Be sure to fill the tank only with dry food or feed.
-
Check if the battery level is low and if the power adapter is connected.
Why are the servings not uniform?
The first servings may vary, but this does not mean that the appliance is defective. After about
6 meals, servings should even out.
Problem
Possible cause
Feeder does not
Clogged food in the mechanism
1
dispense food
Food spills out of the
Unbalanced or unstable feeder
2
feeder
Low battery indicator
3
light on
No battery
ENGLISH
Solution
Check for obstructions
and clear them.
Make sure the food is
dry and loose.
Place the feeder on a
level surface.
Check if the parts are
correctly assembled.
Replace the batteries
with new ones.
Use quality alkaline
batteries.
PUMBA 6000 PURRFECT MEAL SMART
45