cecotec PUMBA 6000 PURRFECT MEAL SMART Manual De Instrucciones página 22

ENGLISH
3. PRODUCT ASSEMBLY
1. Plug the appliance into a power supply.
- Open the battery compartment and put 4 AA batteries (not included).
- Plug the appliance into a power supply.
- When the light indicator lights up, the feeder has been switched on.
Fig. 2
1. Battery compartment (4 AA batteries)
Power plug
2.
- This device has a dual power supply (AA batteries and mains connection). Choose the one
that suits you best. It is recommended to use batteries as an alternative power source and
to connect the device to a power outlet at the same time.
- If there is a power failure or power outage, the batteries can be used as a backup power
source to ensure that your pet receives a continuous supply of food and that meals are
dispensed on time.
2. Assembly the product by following the steps below.
Please note
Remove the parts from the feeder and assemble them in order.
- Fig. 3. Adjust the direction of the food dispensing elements as shown in the figures. The
food outlet should face backwards. Fig 4.
- Put the plastic bowl inside the stainless-steel bowl.
- Place the lid on the food tank. Fig. 5
3. Add pet food into the tank. Fig. 6
Please note
Do not use canned or wet food. Recommended food size: 5-10 mm. Fig. 7
4. Install the safety lock. Fig. 8
4. OPERATION
Fig. 9
1. Button
- Press the icon once to dispense a food serving manually.
- Press and hold the button (1) for 10 seconds to start Wi-Fi connection.
42 PUMBA 6000 PURRFECT MEAL SMART
2. LED indicator
Please note
The appliance is only suitable for 2.4G network connections (it cannot be connected to 5G
networks). Make sure to install 4 AA batteries and to plug the device to a power outlet. Place
the feeder close to the router. It is recommended to place it at a maximum distance of 6 metres
without walls in between.
Blue indicator light If flashing rapidly
If flashing slowly
If it remains steady
Green indicator light If flashing rapidly
If it remains steady
Red indicator light If flashing rapidly
Downloading the application and logging in
1. Scan the QR code or search for the "Cecotec" app in the Apple
Store or Google Store to download it.
2. Open the "Cecotec" app on your mobile phone and click on
"Register" to create an account. If you already have an account, simply log
in.
Please note
Please note that you can only log in to the app from one associated account, but you can use it
to connect to multiple devices and use it on multiple phones.
Connecting the feeder to the APP automatically
Follow the instructions in the app to complete the connection process:
1. Activate the Wi-Fi connection and the Bluetooth.
Open the "Cecotec" app and log in to your account.
2.
3. Reset Wi-Fi on the device by pressing and holding the reset icon for 3-5 seconds.
ENGLISH
The feeder is in Bluetooth
mode ready to connect to the
application.
The feeder is connecting to
the application.
It has successfully connected
to Wi-Fi and is ready for use.
Wi-Fi has been disconnected.
Wi-Fi has been disconnected.
Low battery, connect the
adapter to the power socket
or replace batteries.
PUMBA 6000 PURRFECT MEAL SMART 43