wad Impulse CW004 Manual De Instrucciones página 4

Technical specifications
IMPULSE Black Cutting
Machine
(MODEL CW004)
· Input voltage of AC/DC adapter 100-240 V
· Frequency 50/60Hz
· Power 8 W
· Speed 6.500 RPM
· Metal housing
· DC motor with carbon brushes
· Super torque motor for optimized bulk removal
· 2.500 mAh lithium-ion battery
· 3 hours working time
· Charging time 3 hours
· DLC high-hardness blades
· 4 plastic combs reinforced with metal
· Cutting lengths 0.5-2 mm
· Life time 1000 hours
· Weight 358 g
· Charging stand 145 g
· Noise < 60dB
· Includes lubricant and brush
Worldsell S.L. · C/ de la Mora 22
08918 Badalona, Spain
6
Instructions for use
COMPONENTS:
STAINLESS STEEL BLADE
LEVER FOR BLADE
ADJUSTMENT
SWITCHING ON/OFF
INDICATOR LIG HT
UNIVERSAL VOLTAGE
CHARGER
COMBS
Instructions for use
To start the machine, slide the ON/OFF button up. To switch it off, slide the button down.
How to charge the machine
Place the cutting machine on its
1
bottom side on the recharging base.
When it starts recharging, the charging
3
indicator will light up in red. When the machine is
fully charged, the light indicator will be white.
UNIVERSAL
CLEANING
VOLTAGE
BRUSH
CHARGER
2 Connect it to the power supply.
If the light indicator changes from white to red
4
and starts flashing during use, it means that
the remaining power battery is lower than 10%.
It should be recharged immediately.
7