wad KARE SW012 Manual De Instrucciones página 5

Instructions for use
Make sure your hands are dry and clean.
1
Plug the straightener into the socket.
The luminous display will blink. The device
will remain in standby mode.
Turn on and off the device by pressing on
2
the ON/OFF switch during more or less a
second.
Once the straightener is working, press
3
on the ON/OFF switch to select the time
and mode (ultrasound or infrared).
Adjust the time and intensity by
4
means of the +/- switches.
The ultrasound will work during the
5
selected time. Once you open and close
the straightener again, they start
working again. This feature is conceived
to ensure proper maintenance.
8
SWITCH TO DECREASE TIME, INFRARED
AND ULTRASOUND INTENSITY
ON/OFF SWITCH AND
SWITCH TO INCREASE
MODE CHANGE
TIME, INFRARED
AND ULTRASOUND
INTENSITY
TIME INDICATOR (BELOW) AND INFRARED
INTENSITY (LEFT) AND ULTRASOUND
INTENSITY(RIG HT)
Water test:
Plug the straightener into the socket and
1
place the silver ultrasound plate onto the
lower side.
Pour some water drops on the plate,
2
close the straightener as if the plates
were about to touch each other and
some steam should appear thanks to the
ultrasound that help water evaporate.
Attention: steam shows that ultrasound
is properly working. Steam appears
only when you make the water test. If
you use a mask, ultrasound might not
produce any steam, but this does not
necessarily mean that ultrasound is not
properly working.
The treatment results with this straightener are
the following ones:
1. Hair will be healthier and will have a more intense
colour.
2. Hair will become thicker, stronger, silkier and
brighter.
3. Hair texture will be softer and they will
obtain more body.
4. The more damaged hair is, the more
evident the results will be.
5. The more quality the mask used, the
better the results on the hair.
Infrared helps restoring damaged hair and
stimulates circulation while also allowing to
close the cuticle and to have a healthier and
more nourished hair.
Ultrasound vibration allows proteins and
water molecules to better penetrate into
the scalp.
The combination of these 2 technologies
allows, without need to heat hair and with a
minimal cuticle opening, repairing them more
efficiently by increasing their nourishment,
their elasticity and preventing them from
breaking.
9