Iluminarc LOGIC Wall Panel Expand Kit8 Instrucciones De Instalación página 8

Idiomas disponibles

Step 6

1. Use a #2 Phillips-head screwdriver to loosen the left-most rail clamp and slide it off the rail.

2. Slide the Expand Kit DIN rail breaker onto the rail until it is up against the adjacent DIN rail breaker.

3. Slide the rail clamp back onto the rail until it is up against the Expand Kit DIN rail breaker.

4. Use a #2 Phillips-head screwdriver to tighten the rail clamp.

5. Use a #2 Phillips-head screwdriver to install the power cables to the DIN rail breaker, with the white cables on the

right and the black cables on the left.

First Expand Kit

DIN rail breaker

Second Expand Kit

DIN rail breaker

INSTALLATION INSTRUCTIONS

LΩGIC Wall Panel Expand Kit8 Installation Instructions Rev. 1