Idiomas disponibles
Idiomas disponibles
INSTALLATION
Take care by the installation process that the FOAM VENTILATION BOX is mounted or hung in a stable
way. When the ventilation box is securely fix with the appropriate hanging hooks mounted on the
mounting point (see drawing below), connect then the ventilation ducting.
The Foam Ventilationbox must be connected in accordance with the valid guidelines of the electricity
society, to a power supply that provides with enough power.
MAINTENANCE
Technical maintenance of the Foam Ventilationbox is not needed. It is possible, in order to remove
dirtiness from the Ventilation Box, to use a dry duster to clean it. In that case:
• Take the plug out of the socket, unplug it from the power supply;
• Remove the dirtiness from the housing.
• Remove the ventilation ducting from the exhaustion side;
• Check the fan for cleaning. If the fan is visibly dirty (a layer of fat of more than 1 mm on the blades),
then we recommend you to let a certified installer to perform the cleaning.
• Check the bearing of the fan, turning it with the hand. Check that the fan does not sling (imbalance).
Take contact with a certified installer if the bearings make noise or the fan is imbalanced.
Always turn the power off and take out the plug from the socket, unplug the AIRFAN®Venti-
lation Box from the power supply, before executing any maintenance procedure.
Be aware that after the removal from the power there can still be internal components that
stay loaded.
During the installation, there is the danger of injury because of the rotatory components. Do
never open the housing of the Ventilation Box, meanwhile it is working.
Maintenance procedures should only be executed with an unplugged Ventilation Box and
with the plug completely remove from the socket, with no connection to the power supply.
User Manual
UK
55
