Rfid Reader Setting - Smanos WK8000 Manual De Funcionamiento

EN

RFID Reader Setting

User can enable or disable the function of arming/disarming by
RFID tag, or arming/disarming silently by RFID tag.
Disable RFID Reader
Enter setup state, input:
When one beep is heard and the LED indicator keeps on for
10 seconds, the setup is successful. After the setting, the RFID
tags can not control the system anymore.
Enable RFID Reader
Enter setup state, input:
When one beep is heard and the LED indicator keeps on for
10 seconds, the setup is successful.
13
RFID Tag Silent Mode
By default, the control panel and siren beeps once when arming
the system by RFID tag or beeps twice when disarming the system.
If you want to turn off these beeps, just set the RFID Tag to silent
mode, that is ,when you arm or disarm the system by the RFID tag
via the keypad, The control panel and siren will not beep any more.
However, the keypad itself remains beeps.
Enter setup state, input:
When one beep is heard and the LED indicator keeps on for
10 seconds, the setup is successful.
Note: Default setting: 1, enable RFID Reader. Users can arm or disarm the system
by using the RFID tag.
EN
14