Idiomas disponibles
Idiomas disponibles
Enlaces rápidos
Genadyne XLR8+
Negative Pressure
Wound Therapy System
Patient Quick Reference Guide
About Your Genadyne XLR8+
Negative Pressure Wound
Therapy System
The Genadyne XLR8+ Negative Pressure Wound Therapy
(NPWT) Pump
is part of a complete wound care system.
Composed of three essential components that actively
work together to promote healing, the XLR8+ NPWT System
includes the XLR8+ NPWT Pump, Canisters and Wound
Dressing Kit. The system also includes a battery charger and
a carrying bag. The XLR8+ wound pump removes fluid from
a wound using carefully controlled suction. Throughout your
treatment, be sure to assess your wound and the device to
ensure that the XLR8+ pump is working properly.
For questions or information, contact InfuSystem NPWT Clinical Support at 1-844-534-1997.
Battery Indicator
Treatment Time
Time & Date
Power ON/OFF
Button
Power Jack
Menu/Select
Inlet
Button
NPWT Dressing Kit
NPWT Canisters
Exit/Cancel
Button
Manuales relacionados para InfuSystem Genadyne XLR8+
Resumen de contenidos para InfuSystem Genadyne XLR8+
- Página 1 The XLR8+ wound pump removes fluid from a wound using carefully controlled suction. Throughout your treatment, be sure to assess your wound and the device to ensure that the XLR8+ pump is working properly. For questions or information, contact InfuSystem NPWT Clinical Support at 1-844-534-1997.
- Página 2 Dispose of the canister according to the specified institution protocol. Insert a new canister. Power ON/OFF Button Connect the new canister tubing to the dressing tubing and initiate therapy as ordered. For questions or information, contact InfuSystem NPWT Clinical Support at 1-844-534-1997.
- Página 3 Assess the O-rings located where the canister attaches to the device: There should be 2, one black and one clear. Both should be securely surrounding the nipple. For questions or information, contact InfuSystem NPWT Clinical Support at 1-844-534-1997.
- Página 4 DRESSING AND TUBING. ENSURE THE has been cut out of the dressing located under the port pad. CLAMPS ARE OPEN. PRESS MENU/ SELECT BUTTON TO CONTINUE THERAPY. For questions or information, contact InfuSystem NPWT Clinical Support at 1-844-534-1997. infusystem.com/npwt PW 759 Rev 12/23...
- Página 5 A lo largo del tratamiento, asegúrese de evaluar la herida y el dispositivo a fin de confirmar que la bomba XLR8+ funcione correctamente. Si tiene preguntas o necesita información, comuníquese con el Soporte Clínico de NPWT de InfuSystem al 1-844-534-1997.
- Página 6 Instale un recipiente nuevo. Botón de encendido/pagado Conecte el tubo del recipiente nuevo al tubo del vendaje e inicie la terapia según se haya indicado. Si tiene preguntas o necesita información, comuníquese con el Soporte Clínico de NPWT de InfuSystem al 1-844-534-1997.
- Página 7 Evalúe las juntas tóricas ubicadas donde el recipiente se sujeta al dispositivo: debe haber 2 juntas: una negra y una transparente. Ambas deben rodear la boquilla firmemente. Si tiene preguntas o necesita información, comuníquese con el Soporte Clínico de NPWT de InfuSystem al 1-844-534-1997.
- Página 8 OPRIMA EL BOTÓN DE MENÚ/ del vendaje debajo de la cubierta del puerto. SELECCIÓN PARA CONTINUAR CON LA TERAPIA. Si tiene preguntas o necesita información, comuníquese con el Soporte Clínico de NPWT de InfuSystem al 1-844-534-1997. infusystem.com/npwt PW 759 Rev 12/23...