Grip Rite GRTSM2016C Manual Del Operador página 12

OPERATION
TOOL OPERATION
BUMP FIRE (CONTACT TRIP) OPERATION
1. Position the nose of the tool over the work surface,
near the area where the first fastener is to be driven.
2. Squeeze and hold the trigger in the depressed position.
3. Bump the workpiece contact (safety) against the work
surface at each point where a fastener is to be driven.
4. Using a bouncing motion, continue moving the tool
into position for each fastener drive.
5. When fastening is completed, release the trigger.
GRTSM2016C_OwnersManual007_ENGES.indd 12
12
4/19/19 10:47 AM