Idiomas disponibles
Idiomas disponibles
1973
1. Presentation of Conventional panel IRON 02/04
The conventional fire detection and fire alarm control panel IRON02/04 from COFEM represents
all the knowledge of 50 years experiences in the fire detection market.
This control panel has two models so, it can be adapted to the needs of each installation:
IRON02 (2 zones) and IRON04 (4 zones).
Main Technical features:
Control panel with 2 or 4 zones for using conventional detectors and MPC (manual call
point).
Up to 32 devices (detectors + MPCs) per zone.
2 monitored general sounder output, delayable from 0 to 7 minutes, and protected by a
fuse.
1 immediate alarm output through a dry NO/NC contact (Normally Open/Normally Closed).
1 immediate fault output through a dry NO/NC contact (Normally Open/Normally Closed).
One 30V/DC monitored auxiliary outputs protected by a fuse for external power supply as
sounders, relay units, etc.
It has a test mode for quickly and easy checking of detectors and manual call points.
It allows configuration of the Open line, alarm detector and alarm manual call point
thresholds for adjusting to operation with other detectors.
Metal box with front bolted door, 10 predrilled holes of 28mm to connect wire with panel
and area for two 2A batteries.
Certified according to standard EN 54-2 and EN 54-4.
Dimensions: 248 x 240 x 105 mm.
IP code IP30.
FABRICANTE DE PRODUCTOS CONTRA INCENDIOS– FIRE PROTECTION MANUFACTURER
C/ Compositor Wagner, 8 – P.I. Can Jardí - 08191 RUBÍ (Barcelona) ESPAÑA.
Conventional Control Panel
IRON02/04
FABRICANTSDE PRODUITS CONTRE INCENDIES
Tlf.: +34 935 862 690 - [email protected] - www.cofem.com
9
