PNI SafeHouse HS201 Manual Del Usuario página 8

announce "Self testing now".
• If you have connected a solenoid valve
(not included), press the test button for 3
seconds to close the solenoid valve. The
voice prompter will announce the status of
the solenoid valve.
Operation
• Insert the gas sensor into a 230V power
outlet.
• The voice prompter will accompany you
throughout the use and configuration of the
sensor.
• Priming the sensor takes approx. 3 minutes.
During priming, the light ring on the front
panel will alternately light up in green,
yellow and red. Warning: do not press the
Test button during sensor priming!
• After the 3 minutes of priming, the light
8