BeeSecure BEE-SD Manual Del Usuario página 4

V1.0
1.5 Steps to Follow
• Step 1: Download BeeSecure App and register
• Step 2: Install Battery of the ZigBee Wireless Base
• Step 3: Add BEE-HUB to Wi-Fi from the app
• Step 4: Pair BEE-SD with BEE-HUB from the app
• Step 5: Install BEE-SD
• Step 6: Set up BEE-SD from the APP
Read the full version of user manual online or follow BeeSecure in-app instructions to add and set up your
BEE-SD from the app
It is suggested to follow the steps to install and set up your device. While connecting the BEE-SD
with the hub, please keep the distance between the device and hub as close as possible. After
successfully connecting the hub and smoke detector, you can install the detector up to 20 meters
from the hub (depending on the working environment).
2. Install the Battery
Remove the insulating film between the batteries and the metallic blade in the ZigBee Wireless Base. The
LED light at the base will blink once to indicate the ZigBee base is powered on.
3. Install BEE-SD
After pairing the smoke detector and the hub, the smoke detector can be installed up to 20 meters from the
hub (depending on the working environment). To ensure the distance between the smoke detector and the
hub is within communication range, you can check the status next to the smoke detector in the Home page
of BeeSecure App. Green light indicates the device is online and functioning, orange light indicates the device
is offline/outside of the communication range.
1. Press the closure lock at the bottom of smoke detector indicated in the picture below
www.beesecure.eu
English