i-tec C31HDMIDPDOCKPD100 Manual De Instrucciones página 8

i-tec USB-C HDMI DP Display Dock with PD 100 W
SYSTEM REQUIREMENTS
Hardware Requirements: Device with a free USB-C or Thunderbolt 3 port
TM
Requirements for Power Delivery feature: device with a free USB-C
or Thunderbolt 3 port with Power Delivery support.
TM
Operating system: Windows 10, macOS and Linux with the latest updates
*
macOS does not support Multi Stream Transport (MST) technology.
*
Connecting two monitors to the station on macOS will result in both
monitors showing the same image.
DRIVER INSTALLATION
Windows 10 32/64bit: After connection, the drivers for the docking
station are installed automatically on the system. Before installation
make sure that your system has installed the latest drivers for your
device and updated BIOS.
macOS X: Installation of the drivers in macOS X is automatic. Before installation
make sure that your Mac has installed the latest OS for your device.
CONNECTING THE HDMI / DISPLAYPORT MONITOR
The docking station is fitted with 1x DisplayPort and 1x HDMI for
connecting external monitor with a DP and HDMI interface. Modern
plasma, or LCD monitors and TVs, will serve as the perfect display device
of choice. The graphics chip at the heart of the docking station supports
up to 5K 5120x2880 resolution @60Hz (only by DP). Connect the monitor
to the docking station using a high-quality HDMI cable. The screen of
your laptop, Mac, tablet or PC may flash while installing the external
monitor - this is normal.
- 1 monitor connected via 1x DP cable - resolution up to 5K
5120x2880/60Hz.
5K resolution is only supported if your laptop's USB-C/Thunderbolt™ 3
connector supports DisplayPort 1.4 DSC.
8 |
ENGLISH
ENGLISH