poolstar HOLL'S Gaia Luna Manual De Instalación página 3

Idiomas disponibles
  • ES

Idiomas disponibles

Recommendations
Read this manual carefully before using your sauna for the first time.
We recommend you keep it in a safe place for future reference.
Wood is a living element, to maintain its original appearance, it is important to treat the outside of the
wood against moisture.
Use a saturator only on the outside of the sauna.
Install the sauna on a perfectly flat and hard surface.
The sauna must remain in a dry area. Do not use it near a source of water (bath, damp floor, swimming
pool).
Do not use liquid cleaning products. Disconnect the sauna before cleaning and use a wet rag (see
Maintenance section).
Protect the sauna's electrical cable to avoid it being crushed or pinched.
Prior to replacing certain components, ensure that they are specified by the manufacturer or that they
have the same features as the original parts. Incorrect replacement can cause a fire, a short circuit or
damage to the sauna. We strongly recommend using a qualified technician.
To avoid the risk of burns or electric shocks, do not use any metal tools.
Do not put animals in the sauna.
Do not leave the sauna switched on without supervision.
Do not leave the sauna switched on for more than 3 hours at a time to avoid premature deterioration of
the equipment. After 3 hours continuous usage, switch off the sauna for at least one hour.
We recommend that you do not install a locking system on the sauna door.
Check compliance of your electrical installation prior to connecting your sauna to the power supply.
Write down and keep the serial numbers of the sauna as well as the purchase invoice.
They may be requested from you during your after-sales service request.
EN
1
loading

Este manual también es adecuado para:

Holl's rossa