Idiomas disponibles
Idiomas disponibles
USER GUIDE
VAC
R
9. FIXING THE CENTRAL VACUUM UNIT TO THE WALL
All SACH central vacuums come supplied with a wall bracket comprising two interlocking pieces, one
attached to the rear of the machine, the other to be attached to the wall onto which is slotted the other
part of the bracket. The central unit should be fixed permanently to the wall by means of this bracket.
The central vacuum unit should be installed in a well-aired location providing easy access, far away from
any heat source. Similarly, it should be located close to an electrical supply point. It should be placed at
a height of approximately 0.60m from the floor which will allow for the emptying of the bin. It is advisable
to leave a space on either side of the unit to permit easy handling of the unit.
Wherever possible the central vacuum should always be located on a supporting wall or a concrete wall
to avoid vibrations. Once the location has been chosen, fix the bracket to the wall and hang the central
vacuum unit onto the bracket.
WARNING – SACH recommends that the VAC 2.4's two air outlets are exhausted through two separate
51mm pipes. Exhausting the two air outlets of the VAC 2.4 through a single 51mm pipe can overtax the
central vacuum's motors and potentially damage them. Should your preference be to exhaust through a
single pipe, contact SACH's Customer Service Team ([email protected]) and we can offer you an
appropriate exhaust conversion kit to achieve an efficient and safe exhausting of the central vacuum unit
through a single pipe.
16
