Idiomas disponibles
Idiomas disponibles
USER GUIDE
VAC
R
1. Power indicator: This provides us with an indication of the level of power at which the motor is
working. This can be adjusted by depressing the keys with symbols
and
on the control panel or
sliding the switch up or down on the hose handle.
2. HEPA filter indicator: When the small black frame is completely shaded the protective filter and the
HEPA cartridge need cleaning. The HEPA filter warning indicator works for a pre-determined period of 50
hours.
3. Electrical protection indicator: The indicator should flash if the thermostat or circuit breaker is
activated. In this event you should switch off the central vacuum unit and disconnect it from the electrical
supply. Wait until the thermostat cools down or depress the circuit breaker button and start the central
vacuum up. If the central vacuum doesn't start up, get in contact with SACH's after-sale service team.
4. Indicator showing duration of operation: Depress the "MODE" key and you will see the total length of
time the central vacuum unit has been working.
5. Bin full indicator: When the small black bin is fully shaded this means the bin needs emptying. See
section "Cleaning and Maintenance" for instructions on how this should be carried out.
6. Motor maintenance or replacement indicator: When the indicator starts to flash, maintenance or
replacement of the central vacuum motor is required depending on the nature of the problem.
If this symbol lights up notify SACH's technical service team.
INSTRUCTIONS FOR THE OPERATIONAL KEYPAD
Mode
Reset
1. "Mode" symbol: This key provides an indication of the length of time that the motor and the HEPA filter
have been working. This button only works when the appliance is in stand-by mode. If the central
vacuum unit is running, this indicator will not work.
2. Symbol
: When the unit is being operated manually, depressing this key increases the vacuum
power.
3. Symbol
: When the unit is being operated manually, depressing this key decreases the vacuum
power.
4. "Reset" symbol: This key resets the HEPA and dust tank timers.
Turn off of the central vacuum unit: if you press the
button in order to start up the unit, from the
control panel, you will be able to turn it off, decreasing the power with the
button and finally by
pressing the "RESET" button.
If you start up the unit from the hose you would not turn it off using the "RESET" button.
15
