Rointe D Serie Manual De Instalacion Y Uso página 20

STEP 4 - Select the hours
Once step 3 has been completed, 0h will appear on the display (0h equals
midnight). Use the and buttons to select the hour you wish to change.
Use the button to change (the COMFORT, ECO or ANTI-HEAT mode), for
the hour you wish to change. The corresponding icon will appear for each
mode.
To finish programming, press or wait 30 seconds without pressing any
12h
buttons. To change the programming, go back to step 1 and proceed as
described above.
If you wish to activate the anti-frost mode in the hours that do not have
COMFORT or ECO mode, from the main screen of the towel rail dryer and in
automatic mode, press the key .
*If you wish to modify a different programming for different days, you must
modify each day separately; starting from the main menu for each day or
days to be modified. Follow steps 1 to 4 to program different days, times and
temperatures.
5.9.3. USER MODE
To enter USER mode, make sure the icon is flashing in the submenu and
press to confirm.
A four digit PIN will be required to access the menu. The default PIN is set to
0000. To enter the PIN use the and and and move left, right,
up and down respectively and confirm by pressing after each number you
want to change and is flashing. Once all 4 digits are correctly set; move to OK
and press to confirm. Once this process has been completed correctly,
the desired submenu functions will be displayed.
Below are the different icons that allow you to access the different submenus:
ENABLE / Lower
Upper
DISABLE Change PIN temperature
temperature limit
functions limit
20