Rointe D Serie Manual De Instalacion Y Uso página 10

An installation kit is included in the packaging. Follow the instructions below:
1. Select the right place on the wall.
2. Place the mounting template on the wall, making small marks where the holes are to be
located.
3. Remove the mounting template and drill holes in the wall.
4. Insert the plugs into the holes made.
5. Screw the four metal anchoring pieces to the wall with the 6.3 x 50 mm screws.
6. Screw the four fastening cylinders to the product as shown in Figure 1.
7. Insert the product plus cylinder assembly from point 6 into the metal wall anchoring
parts and fasten with the 2.9 x 9.5 mm grub screw.
Figure 1:
Nº.
1 Plug 10 mm
2 Fixed metalic support
3 Screw 2.9 x 9.5 mm
4 Screw 6.3 x 50 mm
5 Fixing cylinders
6 Towel dryer
10
ITEM
5